304 Stainless Steel Corrosion Rate in HNO3 Solution

Authors

  • Hendrikus Dwijayanto Wibowo Sutarjo Universitas Sanata Dharma Yogyakarta

Keywords:

Korosi, Stainless Steel, HNO3

Abstract

This research purpose to find out the corrosion rate of Stainless Steel 304 in sulfuric acid. Immerse process do in 700 C temperature for 6 hours and than in 290C temperature for 18 hours every day. This condition aim to get closer to the actual use in the manufacture of tubes of reactor SAMOP (Sub Critical Assembly for Mo99 Prad Action). Specimen atfer TIG welding and electric arc welding cleaned from crust and than measured, drawing balanced, and record the first weight. And than specimen innerse to sulfuric acid pH 0.2 and 0.5 in 700C temperature for 6 hours and than in 290C temperature for 18 hours every day for 3 month. Weight recording has been done every week. The survey findings show heavy shrinkage sample, it is well visible on the corrosion pH 0.5 in electric arc welding of 0.105 gram/dm2/month for corrosion 0.026 gram/dm2/month without welding and pH 0.2, arc welding of 0.045 gram/dm2/ month, pH 0.2 no Las 0.02 gram/dm2/month. Specimens that have been welded have significant differences in corrosion rate compare to specimens that have not welded.

References

Amalullia, D. (2016). Analysis of lead (Pb) levels in eyeshadow with various oxidizing agents and wet destruction methods using atomic absorption spectroscopy (AAS). Maulana Malik Ibrahim State Islamic University.

COAL, MH (2020). Application of Artificial Intelligence Technology in the Teaching and Learning Process in the Industrial Era 4.0 and Sociaty 5.0. Merdeka Campus Series 1: Looking at Technology Readiness in Campus Systems, 53.

Dewi, RS (2007). Reduction of Biochemical Oxygen Demand (BOD) and Total Dissolved Solid (TDS) in Domestic Wastewater by Using an Aerobic Fluidized Bed Media Styrofoam Reactor at Start Up.

HUDA, MS (2018). EXPERIMENTAL STUDY OF THE EFFECT OF LIQUID VOLUME VARIATIONS AND EMPLOYMENT LOAD ON SQUEEZE CASTING PROCESS ON TENSIBLE STRENGTH, FATIGUE RESISTANCE AND MACRO STRUCTURE ON T6 HEAT TREATMENT, MATERIALS OF NUTS AND BOLTS OF ALUUBUMIUM COAL COMPOSITE. UNIVERSITY AUGUST 17, 1945.

Julianus, J., & Luckyvano, E. (2014). Synthesis of Cinnamic Acid From Benzaldehyde And Malonic Acid With Diethylamine Catalyst. Journal of Pharmaceutical Sciences and Community, 11(1).

KARAT, LKBT, & HAS, Y. (nd). MECHANICAL ENGINEERING STUDY PROGRAM DEPARTMENT OF MECHANICAL ENGINEERING FACULTY OF SCIENCE & TECHNOLOGY SANATA DHARMA UNIVERSITY YOGYAKARTA.

Octavia, SA (2020). Learning motivation in adolescent development. Depublish.

Setiawan, B. (2012). Final Projects. SEMARANG STATE UNIVERSITY.

Siahaan, SH (2021). STUDY OF CORROSION RATE OF STAINLESS STEEL IN HNO3 SOLUTION. Taguchi Journal: Scientific Journal of Industrial Engineering and Management, 1(1), 108–133.

Sinaga, E., & Rina, M. (2018). Total Flavonoid Level, Antioxidant Power and Hepatoprotective Power Ethanol Extract of Temu Tis Rhizome (Curcuma purpurascens).

Siti, S. (2021). Boiler water quality test in the processing of fresh fruit bunches in palm oil mills. Mathematics and natural science.

STEEL, LKS (nd). MECHANICAL ENGINEERING STUDY PROGRAM DEPARTMENT OF MECHANICAL ENGINEERING FACULTY OF SCIENCE & TECHNOLOGY SANATA DHARMA UNIVERSITY YOGYAKARTA.

Sukarno, B. (nd). Effect of Annealing And Rolling Fit Skin on Mechanical Properties of Electrolytic Cleaning Line (Ecl), Batch Temperate Roll (Btr), And Cold Rool Finished (Crf) Products in Standard Al Killed Steel Sheet Manufacturing Process. Widya Eksakta, 1(1), 249207.

Sumarji, S. (2011). Comparative Study of Corrosion Resistance of Stainless Steel Types SS 304 and SS 201 Using Cyclic U-Bend Test Method with Variation of Temperature and Ph. ROTORS, 4(1), 1–8.

Tarakanita, R. (2011). Analysis of Ca Content in Various Dairy Products Using Atomic Absorption Spectrophotometer (AAS).

Utomo, IAK (nd). ANTIHYPERGLYCEMIC ACTIVITY OF DECOCT BANANA SKIN IN SUCROSE-LOADED SWISS STREAM MINUTES.

Wijayanto, MA, Priyono, HKD, & H Muhammad Musiyam, MTP (2015). Dynamics of Large Industry Development in China in 1998-2012. Muhammadiyah Surakarta university.

Downloads

Published

2021-02-28

How to Cite

Sutarjo, H. D. W. (2021). 304 Stainless Steel Corrosion Rate in HNO3 Solution. International Journal of Mechanical Computational and Manufacturing Research, 9(4), 176–185. Retrieved from https://trigin.pelnus.ac.id/index.php/Computational/article/view/45