Analysis and Suggestions for Improvement of Marubeni Engine Performance at Pt. Indonesian Nuclear Industry (Persero) with Overall Equipment Effectiveness (OEE) Approach
Keywords:
Defect Losses, Maintenance (TPM), OEE (Overall Equipment Effectiveness), Rate of Quality, Six Big Losses, Total Productive, Yield LossesAbstract
The occurrence of downtime can cause the production process to stop and cause the resulting product to not match the specified quality. Therefore, downtime prevention must be carried out by conducting research to determine the effectiveness of the machine using the approach used in increasing the effectiveness of the machine is Total Productive Maintenance (TPM). Meanwhile, OEE (Overall Equipment Effectiveness) is a method used as a measurement in implementing the TPM program, in order to keep the equipment in ideal conditions by analyzing the Six Big Losses of the equipment. Based on the results of the calculation of the Rate of Quality of 72.92%, the value of the rate of quality product is still below the JIPM standard, namely 99%, because the quality level is not close to the standard number, which means that the number of reject products must be suppressed again, supported by the results. which is obtained from the Deffect Losses value of 24.01% and the Yield Losses value of 1.92. In order to obtain representative information for maintenance and continuous improvement (continuous improvement) in an effort to increase the effectiveness of machine use
References
Anastasia, U., & Nulow, Y. (2014). The Influence of Product Quality and Brand Image on Consumer Purchase Decisions. Scientific Journal of Unity Management, 2(2), 181–190.
Arifianto, A. (2018). Implementation of Total Productive Maintenance (TPM) Using Overall Equipment Effectiveness Method.
dwi Hariyanto, A., & Handayani, DI (2015). TOTAL PRODUCTIVE MAINTENANCE IN CHIPER AREA (Case Study at PT. Kutai Timber Indonesia Particle Board). TIME: UNIPA Journal of Engineering, 13(2), 1–8.
Hari, R., & Iriani, I. (2020). HD 102 Machine Maintenance Interval Planning with Realibility Centered Maintenance (RCM) II Method at PT. XYZ. JUMINTEN, 1(1), 96–103.
Heni, Y. (2013). Improving Our Safety Culture. Main Library Gramedia.
Hutahaean, L. (2018). ANALYSIS OF TOTAL PRODUCTIVE MAINTENANCE ON THE PRODUCTIVITY OF THE DRYER TWIND MACHINE USING OVERALL EQUIPMENT EFFECTIVENESS METHOD AT PT. XYZ. Ratih: Journal of Green Industrial Technology Engineering, 1(1), 12.
Maulana, I., Ibrahim, A., & Darmein, D. (2017). Damage Analysis of Hitachi Ex200 Excavator Undercarriage Components At Pt. Takabeya Perkasa Group With Fmea Method. Journal of Applied Science Machinery, 1(1), 32–37.
Munandar, A. (2020). ANALYSIS AND PROPOSED PERFORMANCE IMPROVEMENT OF MARUBENI MACHINERY IN PT. INDONESIAN NUCLEAR INDUSTRY (PERSERO) WITH OVERALL EQUIPMENT EFFECTIVENESS (OEE) APPROACH. Indonesian Institute of Technology.
Novrisal, D., & Yosan, RB (nd). IMPROVEMENT OF AIR CONDITIONING MACHINE MAINTENANCE ACTIVITIES USING THE OVERALL EQUIPMENT EFFECTIVENESS (OEE) METHOD CASE STUDY ON THE ROOM COOLING MACHINE OF THE GRAND STUDIO METRO TV BUILDING.
NUGROHO, AF (2010). CALCULATION OF OEE (OVERALL EQUIPMENT EFFECTIVENESS) ANALYSIS WITH MULTIPLE REGRESSION AS A METHOD TO KNOW THE MOST INFLUENCED LOSSES (Case Study: CV. Mediatama). Muhammadiyah University of Surakarta.
Permatasari, DI (2018). Filling Machine Maintenance Planning with Markov Chain Method To Minimize Maintenance Costs at PT. Swabina Gatra. Muhammadiyah University of Gresik.
Rahman, A. (2019). Total Productive Maintenance on Offset Printing Machine SM 102 ZP (Case Study at PT. XYZ). STRING (Technology Research and Innovation Writing Unit), 4(1), 48–56.
Rahmawati, E. (2020). PROPOSED SCHEDULING USING TOTAL PRODUCTIVE MAINTENANCE (TPM) WITH OVERALL EQUIPMENT EFFECTIVENESS (OEE) METHOD ON OFFSET PRINTING MACHINE IN CV. JASINDO'S FIRST GREAT. Indonesian Institute of Technology.
Santoso, WAA (2017). Measurement of Overall Equipment Effectiveness Value as a Basis for Proposed Performance Improvements in the Annealing Pickling Line Machine Process at PT. Jindal Stainless Limited. Muhammadiyah University of Gresik.
STRATEGY, UK, & COUNTRY, LA (nd). PLANNING STRATEGIC ALLIANCE THROUGH SWOT ANALYSIS AT PT BATAN TEKNOLOGI (PERSERO).
Sudarso, A. (2022). UTILIZATION OF DATABASE, SOFTWARE AND INDUSTRIAL MACHINERY IN INCREASING COMPANY PRODUCTION (LITERATURE REVIEW EXECUTIVE SUPPORT SYSTEM (ESS) FOR BUSINESS). JOURNAL OF EDUCATION AND SOCIAL SCIENCE MANAGEMENT, 3(1), 1–14.
Suhaeni, T. (2018). The Influence of Innovation Strategy on Competitive Advantage in the Creative Industry (Case Study of MSMEs in the Handicraft Sector in Bandung City). Journal of Business Research and Investment, 4(1), 57–74.
Susilo, D. (2021). Visual Transparent Predictable Manufacturing: A manufacturing management concept. Nas Media Library.
Wiyatno, TN (2015). Productivity Improvement Strategy Design Based on Total Productive Maintenance with Dmaic Six Sigma Approach. Semnastek Proceedings.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Aris Munandar
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
