Solid block to assembly block conversion on a welding
DOI:
https://doi.org/10.35335/computational.v14i2.267Keywords:
Assembly, Machine Grinding, Machine Mash Weld, Stopper, WeldingAbstract
Block damage often occurs due to the pressing process and the presence of residual welding dirt on the slug so that a repair process is needed by means of grinding. If there is damage to the solid block, repairs are carried out on all sides of the block so that this is less effective and efficient in repair time. This research was conducted by changing the design of solid blocks into assembly blocks which aims to make the process of repairing blocks effective and efficient. To find out the results of the differences between solid blocks and assembly blocks, a trial was carried out by calculating the repair process time using a grinding machine with a depth of 0.04 mm. The results of the solid block repair process trials obtained an average of 397 seconds while the assembly blocks obtained an average of 248 seconds. Thus cutting the repair process time by 149 seconds. With this design change, the effectiveness and efficiency of block repair time is obtained.
References
Ardiansyah, R. P., Prastiwinarti, W., & Pratama, P. (2024). Pengendalian Kualitas Plat Cetak Offset Dalam Mengatasi Defect di PT . ABC Abstrak. 4(1), 1138–1146.
Chen, X., Li, Z., Yang, D., Wang, Y., Yi, H., & Xie, G. (2024). Achieving excellent properties of resistance spot welded 2GPa-grade press hardened steel and galvanized DP980 steel via double-pulse. Journal of Materials Research and Technology, 28(October 2023), 4475–4487. https://doi.org/10.1016/j.jmrt.2024.01.027
Diah Larasati, P., Triyono, T., Brenda Vernandez, A., Muqorrobin, M., Hari Riyadi, A., Santosa, H., Eko Nuryanto, L., Widiarto, E., Setyoko, S., & Syahid, S. (2024). Peningkatan Kualitas dan Kuantitas Produksi Pengelasan dengan Menggunakan Mesin Las MIG pada Usaha Bengkel Las Rahman Jaya di Kelurahan Gedawang, Kecamatan Banyumanik, Kota Semarang. Jurnal Pengabdian Kepada Masyarakat Nusantara, 5(2), 2057–2063. https://doi.org/10.55338/jpkmn.v5i2.3140
Dvirna, O. (2024). the Innovative Post-Weld Finishing Method and Non-Standard Cutting Tool for Carrying Out This Method. Acta Mechanica et Automatica, 18(1), 22–28. https://doi.org/10.2478/ama-2024-0003
Dzulfian Syafrian, dkk. (2025). No 主観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析Title. Sustainability (Switzerland), 11(1), 1–14. http://scioteca.caf.com/bitstream/handle/123456789/1091/RED2017-Eng-8ene.pdf?sequence=12&isAllowed=y%0Ahttp://dx.doi.org/10.1016/j.regsciurbeco.2008.06.005%0Ahttps://www.researchgate.net/publication/305320484_SISTEM_PEMBETUNGAN_TERPUSAT_STRATEGI_MELESTARI
Galingging, R., & Arif, S. (2022). Analisis Pengendalian Cetak Kotor (Scuming) pada Mesin Cetak Offset Gronhi 524 di Percetakan MAU Grafika SMK Negeri 4 Malang. Magenta | Official Journal STMK Trisakti, 6(01), 892–909. https://doi.org/10.61344/magenta.v6i01.84
Haider, S. M., Khan, S. A., Ali, M. A., Farooq, M. U., & Ishfaq, K. (2022). Thermal experiments and analysis on adhesive cleaning of work-holding devices by grinding. International Journal of Advanced Manufacturing Technology, 122(9–10), 3849–3865. https://doi.org/10.1007/s00170-022-10139-w
Haryanto, P., Ismail, R., jamari, & Nugroho, S. (2011). Pengaruh gaya tekan, kecepatan putar, dan waktu kontak pada pengelasan gesek baja st60 terhadap kualitas sambungan las. Jurusan Teknik Mesin Politeknik Negeri Semarang, 88–93.
Jagadeesan, S., Ganesh, M., Karthik, S., & Student. (2019). Design And Fabrication Of Automated Sealing Machine. 7(2), 325–327. www.ijedr.org
Kim, D. Y., Lee, T. H., Kim, C., Kang, M., & Park, J. (2023). Gas metal arc welding with undermatched filler wire for hot-press-formed steel of 2.0 GPa strength: Influence of filler wire strength and bead geometry. Materials Today Communications, 34(November 2022), 105244. https://doi.org/10.1016/j.mtcomm.2022.105244
Kolokas, A., Mallioris, P., Koutsiantzis, M., Bialas, C., Bechtsis, D., & Diamantis, E. (2024). Effective Machine Learning Solution for State Classification and Productivity Identification: Case of Pneumatic Pressing Machine. Machines, 12(11). https://doi.org/10.3390/machines12110762
Łastowska, O., Jurczak, W., & Starosta, R. (2025). Influence of surface quality on corrosion resistance of stainless steel and aluminum alloy butt welds after innovative finishing. Scientific Reports, 15(1), 1–16. https://doi.org/10.1038/s41598-025-13473-7
Maierhofer, T., Loukaides, E. G., Carr, C., Bisagni, C., & Butler, R. (2024). Resistance-welded thermoset composites: A Bayesian approach to process optimisation for improved fracture toughness. Composites Part A: Applied Science and Manufacturing, 177(November 2023), 107894. https://doi.org/10.1016/j.compositesa.2023.107894
Miao, H., Yamashita, T., Ushioda, K., Tsutsumi, S., Morisada, Y., & Fujii, H. (2025). Improving fatigue property of linear friction welded cruciform joints of low carbon steel. Journal of Manufacturing Processes, 146(March), 55–64. https://doi.org/10.1016/j.jmapro.2025.04.093
Mizobuchi, A., Hamada, T., Tashima, A., Horimoto, K., & Ishida, T. (2022). Polishing Performance of a Recycled Grinding Wheel Using Grinding Wheel Scraps for the Wet Polishing of Stainless-Steel Sheets. International Journal of Automation Technology, 16(1), 60–70. https://doi.org/10.20965/ijat.2022.p0060
Mosora, Y., Deineha, R., Mykhailiuk, V., & Faflei, O. (2024). Development of the Press Mould Design and Manufacture of the Seal Model of the Universal Preventor. International Scientific and Technical Conference Information Technologies in Metallurgy and Machine Building, 405–409. https://doi.org/10.34185/1991-7848.itmm.2024.01.077
Rahmadhani, D. F., Taroepratjeka, H., & Fitria, L. (2014). Usulan Peningkatan Efektivitas Mesin Cetak Manual Menggunakan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus Di Perusahaan Kerupuk TTN). Jurnal Online Institut Teknologi Nasional, 02(4), 156–165.
Rahman, A. (2019). Total Productive Maintenance pada Mesin Cetak Offset Printing SM 102 ZP (Study Kasus di PT. XYZ). STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 4(1), 48. https://doi.org/10.30998/string.v4i1.3614
Rodrigues, J. R. P., Do Nascimento, C. C. F., Batista, S. R. de F., Vilarinho, L. O., Barros, J. L. M., & Gonçalves, R. S. (2019). Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead. Acta Scientiarum - Technology, 41(1), 1–10. https://doi.org/10.4025/actascitechnol.v41i1.37732
Roh, J. S., & Kim, M. H. (2025). Mitigation of the residual stress and deformation in seam pipe with girth welding and cutting. International Journal of Naval Architecture and Ocean Engineering, 17(March). https://doi.org/10.1016/j.ijnaoe.2025.100657
Sabry, I. (2024). Exploring the effect of friction stir welding parameters on the strength of AA2024 and A356-T6 aluminum alloys. Journal of Alloys and Metallurgical Systems, 8(October), 100124. https://doi.org/10.1016/j.jalmes.2024.100124
Sinambela, Y. (2020). Analisis Perawatan Mesin Cetak Offset Heidelberg dengan Metode Total Productive Maintenance. Jurnal Optimalisasi, 6 Nomor 2, 157. www.jurnal.utu.ac.id/joptimalisasi
Sreerag, M. N., Kumar, S. G., Kumar, K. B., Kurian, T., & Kumar, S. N. (2024). A study on the effect of weld repair on the structural margins of a solid rocket booster hardware. Procedia Structural Integrity, 60(2023), 20–35. https://doi.org/10.1016/j.prostr.2024.05.028
Tijs, B. H. A. H., Turon, A., & Bisagni, C. (2024). Characterization and analysis of conduction welded thermoplastic composite joints considering the influence of manufacturing. Composite Structures, 348(March). https://doi.org/10.1016/j.compstruct.2024.118505
Toasa Caiza, P. D., Shiozawa, D., Murao, Y., Ummenhofer, T., & Sakagami, T. (2025). Monitoring of crack length growth on welded specimens by applying square wave inductive thermography. International Journal of Fatigue, 190(August 2024), 108642. https://doi.org/10.1016/j.ijfatigue.2024.108642
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Abri Andry Saresa Marbun, Adi Syahputra Purba, M. Noviriandi Ramadhan, Windy Andaresta, Danang Cahyagi
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
